Hamboards Complete 43" Pescadito Dart HST

Hamboards Complete 3' 7" Pescadito Dart
 

Dimensions:

Length: 3.7ft | Width: 14.5in

Deck:

High-Quality 8 ply Maple/Birch/Maple plywood OR natural 3 ply Bamboo plywood.  UV resistant painted decorations or heat transfers are covered with a "clear" grit on top.  Clear varnish protects the bottom side.  There's wheel wells and grab rails on the bottom side.  PRO TIP: If you're grabbing rail on a backside turn, you've definitely figured it out and you're well on your way to mastering this b-you-tee.  

Trucks:

Patented Hamboards HST Carving Trucks w/ Silver (20lbf max) Springs and Black Kingpins, 25mm Birch (or Bamboo) Plywood riser blocks keep you up to avoid rail drag and the extra sized M6 50mm Hardware holds the trucks securely. 

Note: Gold (25lbf max) springs available as accessories and can be swapped out for the stock silver springs.  We think golds are a bit too snappy on this board but they cab be helpful for beginners and/or heavier riders.  To maximize "pumpability" swap the rear Silver Spring to a Gold Spring and you'll feel a difference that makes a difference for pump.  

Wheels & Bearings:

Custom Hamboards Milk Chocolate Cast PU 66mm 78/80A (46mm wide, 35mm contact).  It's not about the shape of the wheels, it's about the trucks, so we give you max contact area.  Hamboards SAN-O Turning Bearings are Chrome plated, greased and sealed.  The bearing experts tell us that grease is better for hard carves and heavy loads at low speeds.